How To Design Office Building Roof: The Best Roof Tips (NEW)

Office Building Roof

It’s Time To Build Your Office Roof.  And If You are not Know How To Design Office Building Roof,

Don’t Worry!

In This Post, I Cover How To Design Office Building Roof Step by Step.

So Let’s Start

 

The Roof Of The Office :

Define Ceiling of an Office: The home is the highest part of the house, which acts as a cover for the structure and from the adverse effects of the weather.

Protecting the building is called Roof or Roof or Rice. On the other hand, roofs are called structures that cover the building and its structure to protect goods – from storms, rains, heat, snow, wind, etc.

 

The two halves of the roof. Namely:

  • (1) Roof Structure
  • (2) Roof coverings.

 

Roof coverings refer to the bearing structure in the roof structure. Such as – trusses, pearls or shields, beams, slabs, shells or dams. Again, raft, rain, wind cover, and rough structure are called coarse roof coverings. Such as AC sheet, GI sheet, Strung or wood canopy, tile, straight or slab.

Building Roof

The sustainability of the building can be enhanced by carrying environmental ladders together with the roof structure and roof coverings.

Under artificial roofs, artificial coverings are created with various substances to enhance the beauty under the main roof, called a ceiling or artificial roof.

Mechanical installation using fault ceiling, eg. C Duct, pipeline, electric line, etc. are supported. Fruit enhances the beauty of the ceiling room. Fruit ceilings. Acts as a covering on the surface of the building.

The roof is usually 2 “- 0” to 2 “- 6” deep. Improves the interior of the office using a variety of materials.

 

Different types of the ceiling:

Different types of the ceiling are used in office buildings and have mechanical ducts, electrical warming plumbing lines, various types of lighting, system fire detection devices, and sound systems that are not visible from outside.

Different types of materials are used to construct a hanging roof. Usually, the hanging roof can be made using a steel channel frame, wooden frame, angle tee or chain.

 

In addition to False Ceiling, there are different types of ceilings, such as –

  • (i) Single Sloped Ceiling
  • (ii) Gabled Ceiling
  •  (iii) Pyramid Ceiling
  • (iv) Cove Ceiling
  •  (v) Vaulted Ceiling
  •  (vi) Domed Ceiling
  •  (vii) Freeform Ceiling etc.

While the ceiling is hung inside the building, the ceiling is made up of a framework that is hung from the main ceiling with a metal or wooden hanger. Materials used on the roof may be fixed or left with framework.

 

The fruit ceiling can be divided as follows:

 

#1. Jointless Ceiling: This ceiling is made in in-situ construction. It is stained with wood or metal framework that hangs from the main roof of the building by metal support or hanger. The various Finnish materials used in the Jointless Ceiling are plastered on large sheets of plaster bard or a thin coating of metal. Jointless ceilings can be of such materials.

 

#2. Frame and Panel Ceiling: The framework of Ceiling Frame and Panel Ceiling is similar to Jointless Ceiling, which is made of steel or aluminum grid and it hangs from the main roof with a metal hanger.

 

#3. Strip Ceilings: Strip ceiling frame and panel ceiling-like structure. This type of ceiling has it’s aluminum or steel sections hanging from the main roof by a steel war hanger.

 

#4. Open Settings: Usually this type of open ceiling is made up of vertical hanging straps or grits that cause redness on the surface. With this, the ceiling is hanging from the ceiling.

Shown below are three of the different patients of the ceiling –

(i) Grid Structural  Pattern

(ii) Radial Structural Pattern

(iii) directional Structural Pattern

 

The workings of the hanging roof are as follows:

 

(i) In the installation of plumbing fixtures, straps and pipes are arranged so that they are not easily seen.

 

(ii) Covering the line of sight by covering the pipeline, AC duct, etc.

 

(iii) It helps to compress the volume of the room, which plays an important role in determining the AC’s LED.

 

(iv) It helps control the temperature.

 

(v) Sudhu assists in the reconciliation.

 

(vi) Hanging ceiling enhances beauty.

 

(vii) The hanging ceiling controls the sound.

 

You can use the following items of hanging ceilings:

  1. Gypsum board,
  2. Plastic wired,
  3. Mineral Beard,
  4. Plain sheet,
  5. Plywood,
  6. Plaster,
  7. Plaster of Paris,
  8. Aluminum,
  9. Wood,
  10. Partex,
  11. Corrugated sheet.

 

Different types of roofing materials used:

The ceiling is an essential component of the components of an office building. This is a highly customized design. Sheltering acts as a material. Ceiling – The type of materials used varies according to its type.

Office Roof

The materials commonly used in ceilings are concrete – concrete, wood, metal, steel, aluminum grid, aluminum sheet, stainless steel, glass, gypsum berd, melamine berd, plywood mineral berd. Acoustic tiles are used as excellent sound absorbers in the ceiling. It is rectangular or oblong.

Acoustic tiles are glass fibers or aluminum made of vinyl ceramic. It is characterized by small pores.

Ceiling materials are used for thermal insulation, which uses Ted Oil Steel. Mirror Glass Block, For state Glass Tinette Glass, can be used as a reflective material for reflective ceilings.

In addition to the ceilings or hanging ceilings inside the office range, you will use prude melamine beards and glass for various craftsmanship and decoration.

 

Reflective Roof:

A roof made of glass is called a reflective roof. Reflective ceilings are commonly used in various areas such as office entry, reception area, exhibition area, lobby, elevator, interior terrace.

Mirror, glass block, tint glass, Forrest glass, etc. are used as reflective roofing materials. At present, glass paint has become very popular as a reflecting material.

Reflected Ceiling’s work is to absorb the interior beauty of the office space by utilizing the interior lighting system of the office.

 

The materials used on the roof are discussed in terms of color and texture differences over time:

Color:

The base is called a base, a vehicle pigment, a dryer, a mixture of bins to color the structure’s particles. The paint is usually applied on the surface in the form of a brush railer or spray.

Dark colors can be used on the ceiling if the height of the ceiling is less visually appealing. But in this case, the color of the ceiling used in the color of the wall of the room will be relatively different in color.

Different colors used in ceilings such as Alfie paint, well-based paint, latex paint, etc. On the use of the colors of various materials used in the ceiling inside the office van.

The beauty of the outer surface is blown out and gives a smooth and uneven surface. It also protects the dye materials from damp climates and various insects. In addition, the color of the material is different depending on the material used.

Depending on the type of office and the nature of the work, the color should be selected according to the variations of the room so that it does not have any adverse effect on the work environment of the office and the work speed of the staff.

You need to be careful about choosing the right color and applying it so that it works.

 

Texture:

Each substance has an internal structural texture. For example, the wood that is seen on the cut is the inner knit. And each substance or object has an outer texture of the open floor.

This external texture can be natural. However, you can change the knit as you wish. For example – engraving, cutting, pressing or welding. In many ways, polygons produce smooth or rigid textures. The open floor texture can be called the dimensional termination layer.

There are two types of knitting. The touching knit is the other visible knit. The touching knit is felt in touch with the body.

The textile texture depends on the touch. The texture of a warm cloth is tightened to create a warm feeling during the winter season by creating heat in the friction with the body. On the other hand, the texture of warm black clothing is smooth, with the purpose of preventing heat buildup.

The touching knit can be as smooth to smooth as soft to hard. Soft texture creates a touch of interest and discourages touched texture. However, if the hard textured surface is polished with a very smooth polishing, it creates a touch of re-touch.

For example, the handle of the door lacquer is usually nickel-shaped to accommodate the touch.

The visible texture is felt without touch. Such as – Friend’s Hill – Mountains, hardwood fields, hard rock, soft grass, etc.

Visible textures can also be created under the shade control of the ala and can develop a variety of emotions.

The exposed brick walls are slightly uneven as the sun plays a ray of shadow Takes the form of It depends on the variation of textile materials.

The materials used in Ceiling are made of smooth texture and any of them is asymmetrical. The texture of the material depends on the material made of it, such as gypsum board, mineral beard, etc. The textured plates on the other hand. Its texture is uneven.

The metal ceiling, steel stainless steel structure is linear and Ted shaped. Ceiling’s textures vary depending on their texture, such as: Reflected Ceiling A | C is used to reflect the smooth and light reading of the texture.

On the other hand, the gypsum board is commonly used in the conference room of the auditorium to serve as sound absorbent material and its perforation is also used.

Wooden texture is smooth and stitched on the projectile according to the working pattern. Different types of crafts can be used to differentiate the ones used in decorative work.

 

Leave a Reply

Your email address will not be published. Required fields are marked *